#1. In Ip Firewall NAT, you can Classify Traffic in SRC Nat Chain based on " in-interface".
#2. Which tunneling protocol can be created only between two RouterOS devices?
#3. What is the default protocol/port of (secure) winbox
#4. Choose all valid hosts address range for subnet 184.108.40.206/27
#5. What kind of users are listed in the "/user" menu
#6. Router A and B are both running as PPPoE servers on different broadcast domains of your network. Is it possible to set Router A to use "/ppp secret" accounts from Router B to authenticate PPPoE customers ?
#7. Is it possible to have PPTP Client and PPTP server on one MikroTik router at the same time
#8. Which configuration menu should you use to change router's Winbox default port?
#9. ? Is it possible to limit how many clients are able to connect to an access point
#10. Which option in the configuration of a wireless card must be disabled to cause the router to permit ONLY known clients listed in the access list to connect?
#11. Can you manually add drivers to RouterOS in case your PCI Ethernet card is not recognized, and you suspect it is a driver issue?
#12. In RouterOS queue configurations the word "total" usually represents
#13. To use masquerade, you need to specify
#14. A backup file from a MikroTik router is stored in plain text format
#15. It is necessary to configure a local DNS server to be able to give out a DNS setting to clients via DHCP server.
#16. How many DHCP servers could you run on one interface
#17. What is the correct action for a NAT rule on a router that should intercept SMTP traffic and send it over to a specified mail server?
#18. Connection marks are stored in the connection tracking table.
#19. You can control bandwidth of a client connected to AP with the resource / interface wireless access-list ( assume the client uses MikroTik RouterOS).
#20. How many layers does Open Systems Interconnection model have